0 Error Message Table. 1 An internal error occurred in Winstone 32. Please contact the Ziff-Davis Benchmark Operation (ZDBOp) and report this error.\n\nThe following information is for ZDBOp use:\n\n Predicate: %.50s\n File: %.50s\n Line: %lu 2 Winstone 32 ran out of Data Segment storage. Please contact the Ziff-Davis Benchmark Operation (ZDBOp).\n\nThe following information is for ZDBOp use:\n\nSize: %ld\n\n%s 3 Winstone 32 could not allocate enough memory to run. If other applications are running, terminate them and try running Winstone 32 again.\n\nThe following information is for ZDBOp use:\n\nSize: %ld\n\n%s 6 Winstone 32 could not locate the %s resource in WS32.EXE. Check to see if the file is corrupt or inaccessible. 7 Winstone 32 found that the %s resource in WS32.EXE has an invalid size. Check to see if the file is corrupt or inaccessible. 8 Winstone 32 could not open the file %s to write to it. Check to see if it is in an inaccessible directory, if it is write-protected, or if the computer has run out of file system space. 9 Winstone 32 could not open the file %s to read from it. Check to see if it exists or is inaccessible. 10 Winstone 32 could not access the file %s. Check to see if it is corrupt or inaccessible. 11 Winstone 32 could not read from the file %s. Check to see if it is inaccessible. 12 Winstone 32 could not write to the file %s. Check to see if it is inaccessible. 13 Winstone 32 has detected that the file %s is corrupt. Replace it with the original version. 14 Winstone 32 has aready encrypted sensitive areas of %s. Winstone 32 has not taken any action. 15 Winstone 32 has not encrypted sensitive areas of %s. Winstone 32 has not taken any action. 16 The parameter distribution:\n\n %.50s\n\nis not valid. 17 The parameter distribution:\n\n %.50s\n\nhas values that are out of the allowable range. 18 Winstone 32 could not locate the test parameter '%s' in the test '%s'. 19 Winstone 32 could not load the string resource number %lu. Check if the file is corrupt. 20 The test %s does not exist. 21 Winstone 32 could not create a brush. If the system resources are low, terminate other applications and try again. 22 Winstone 32 could not create a pen. If the system resources are low, terminate other applications and try again. 23 Winstone 32 could not register a window class. If the system resources are low, terminate other applications and try again. 24 Winstone 32 could not load a cursor or icon resource. If the system resources are low, terminate other applications and try again. 25 Anything that keeps Winstone 32 from filling the entire screen can affect results.\n\nYou should disable the Windows 95 Taskbar "Always on top" option before running Winstone 32. You should also hide application toolbars that consume screen area. 26 Do not obscure the Winstone 32 window when running tests. Close other applications that have windows in front of the Winstone 32 window. 27 You aborted the test. 28 Winstone 32 could not copy the window image to the clipboard. Check to see if enough memory is available. 29 Winstone 32 could not load the Accelerator Table resource. If the system resources or memory are low, terminate other applications and try again. 30 Winstone 32 could not create a window. If the system resources are low, terminate other applications and try again. 31 Winstone 32 could not create a dialog box. If the system resources are low, terminate other applications and try again. 32 Winstone 32 could not start the Windows Help program. 33 Winstone 32 could not create a procedure instance. 34 Winstone 32 could not install a message filter. 35 Winstone 32 could not create a font. If the system resources are low, terminate other applications and try again. 36 Winstone 32 could not change the color in a device context. 37 Winstone 32 could not extend the message queue length. 39 The test description contains a token that is too long:\n\n %.50s 40 The test description ended prematurely. 41 The test description is incorrect. Parsing failed at the token:\n\n %.50s 43 A weighted mark description refers to a test that does not exist:\n\n %.50s 44 Winstone 32 could not manipulate a list box control. 45 Winstone 32 could not perform a GDI painting operation.\n\nThe operation was:\n\n %s 46 A combination test description refers to a suite that does not exist:\n\n %.50s 47 The count parameter %.50s is out of range. 48 A combination test description contains incompatible tests. 49 The '%s' parameter for the test '%s' is not a valid integer value. 50 A test contains an invalid alignment parameter. 51 Winstone 32 could not create a device context. If the system resources are low, terminate other applications and try again. 52 Winstone 32 could not create a bitmap. If the system resources are low, terminate other applications and try again. 53 The '%s' parameter for the test '%s' is not a valid floating-point value. 54 A test contains an invalid ratio parameter. 55 Winstone 32 could not perform a StretchBlt operation. If the system resources are low, terminate other applications and try again. 56 A test contains an invalid font description:\n\n %.50s 57 You must run a test before copying the test screen image to the clipboard. 59 Winstone 32 has detected an old version of Microsoft Windows. You can only run Winstone 32 on Windows 3.1 or later. 60 You can only run Winstone 32 on a VGA or larger display. The display must have a horizontal resolution of at least 640 pixels and a vertical resolution of at least 480 pixels. 61 The command line is invalid:\n\n WS32.EXE %.100s\n\nValid command line options include:\n\n nocpucheck\n novidcheck\n noregcheck\n nosyscheck\n auto \n 62 Winstone 32 could not get the full path name for the file %s. Check for invalid directories and file names. 63 Winstone 32 could not load the %.50s resource. If the system resources are low, terminate other applications and try again. 64 Winstone 32 could not rename the file %s. 65 Winstone 32 could not read the file %s because it is larger than 64000 bytes. 66 Winstone 32 could not create the file %s. Check to see if the directory is inaccessible. 67 Winstone 32 could not manipulate an edit control. 68 Winstone 32 could not print the chart.\n\nThe following information is for ZDBOp use:\n\n Chart Error: %lu 69 Winstone 32 could not access the chart file. Check to see if it is accessible.\n\nThe following information is for ZDBOp use:\n\n Chart Error: %lu 70 Winstone 32 could not allocate memory while creating the results chart. If other applications are running, terminate them and try again.\n\nThe following information is for ZDBOp use:\n\n Chart Error: %lu 71 Winstone 32 could not create the results chart. If other applications are running, terminate them and try again.\n\nThe following information is for ZDBOp use:\n\n Chart Error: %lu 72 An internal error occurred in Winstone 32. Please contact the Ziff-Davis Benchmark Operation and report this error.\n\nThe following information is for ZDBOp use:\n\n Already Freed String: %.50s 73 A suite with the name %s already exists. Winstone 32 has not replaced the suite. 74 You cannot delete or edit the built-in test suite named %s. Use the Create item in the Suite menu to create a custom suite. 75 No suite with the name %s exists. 76 Winstone 32 could not select a bitmap into a memory DC. 77 Winstone 32 could not create a region object. If the system resources are low, terminate other applications and try again. 78 You cannot run Winstone 32 at the current screen resolution and font size. Increase the screen resolution or decrease the standard font size using Windows Setup or a Setup program supplied with the display drivers. 79 Winstone 32 could not select a GDI object into the screen DC.\n\nThe following information is for ZDBOp use:\n\n%s 80 The display device driver does not implement the FastWindowFrame GDI operation. It is an optional call that accelerates window frame drawing. The absence of this operation will not affect the Graphics WinMark results. 81 A test contains an invalid percentage parameter. 82 A %s occurred in Winstone 32.\n\nThis error may cause erratic behavior or other errors in tests that follow. You should reboot the machine as soon as possible.\n\nThe following information is for ZDBOp use:\n\n%s 83 Winstone 32 detected an error when printing a document.\n\nFor ZDBOp use: Error 0x%lx occurred during %s 84 Winstone 32 detected an error when attempting to change the printer setup.\n\nFor ZDBOP use: Error 0x%lx occurred during Printer Setup. 85 The comparison file contains an unterminated string:\n\n Line: %ld, Near: %.50s 86 The comparison file is not valid. Parsing failed at:\n\n Line: %ld, Near: %.50s 87 The "%s" font is not installed. You must install the font before running this test. 88 The "%s" font is not installed. You must install the font if you want to display the Chart of Results. 89 Winstone 32 cannot determine the refresh rate because the computer is too fast. 90 Winstone 32 cannot determine the refresh rate because the computer is too slow. 91 Winstone 32 cannot determine the display driver file name because there is no display.drv setting in the [boot] section of the SYSTEM.INI file. 92 Winstone 32 calculated a negative total execution time of %ld milliseconds. Negative times may indicate an invalid system timer. Report this result to ZDBOp. 93 You aborted the test script. 94 A test contains an invalid mean parameter. 95 You must insert the %s in drive %s before running the selected test(s). 96 You cannot print until you install a default printer driver using the Printers option in the Control Panel application. 97 %s 98 A DOS file operation failed during the test.\n\nThe following information is for ZDBOp use:\n\n %s 99 A DOS file operation that was supposed to fail succeeded during the test.\n\nThe following information is for ZDBOp use:\n\n %s 100 A DOS file operation failed during the disk test. Check that the test drive is writable and has enough free disk space to run the test.\n\nThe following information is for ZDBOp use:\n\n %s 101 The test failed. If other applications are running, terminate them and try running Winstone 32 again.\n\nThe following information is for ZDBOp use:\n\n %s 102 Winstone 32 has found insufficient free disk space on drive %s to run this test.\n\nYou need approximately %ld additional bytes to run the test. 103 A DOS file operation failed during the disk test. Winstone 32 has detected that insufficient free disk space remains to complete the test.\n\nThe following information is for ZDBOp use:\n\n %s 104 The drive %s is not a valid drive or is not accessible. 105 Winstone 32 is unable to determine the color reproduction method because the display drive uses a dithering pattern that is too large. 107 Winstone 32 could not register a notification procedure. 108 Winstone 32 could not start a program using the command line:\n\n%s\n\nThe program returned an error code of %ld. 109 %s 110 Winstone 32 could not run the test because a program named %s was already loaded. 111 Winstone 32 could not run the test because a module named %s was already loaded. 112 The program started using the command line:\n\n %s\n\nfailed to terminate within the alotted time. 113 The file %s is not an executable file. 114 Winstone 32 could not open the AVI file %s because %s 115 Winstone 32 could not play the AVI file %s because %s 116 Winstone 32 could not open the AVI video device. Make sure the system has an AVIVIDEO device set up. 118 The file %s already exists. You must delete this file before Winstone 32 can overwrite it. 119 Winstone 32 could not delete the file %s. 120 Winstone 32 cannot play the video clip %s because it would be clipped by the Winstone 32 window. 121 Winstone 32 cannot play the video clip %s at its current scale because it would be clipped by the Winstone 32 window.\n\nReduce the scale factors or increase the screen resolution and run the test again. 122 You aborted the test. 123 The video test failed because the play command was superseded. 124 The video test failed because a device error occured while the device was executing the play command. 125 Winstone 32 requires Video for Windows version 1.1 or later in order to run any video tests. 126 Winstone 32 has found insufficient free disk space to copy the file %s.\n\nYou need approximately %ld additional bytes to run the test. 128 Winstone 32 could not complete copying %s to %s. 129 Winstone 32 could not run this test because %s 130 Winstone 32 can play a maximum of %ld video clips at the same time. 132 Winstone 32 cannot display more than %ld clipping windows. 134 The '%s' parameter for the test '%s' is not formatted correctly. 136 The '%s' parameter for the test '%s' is not formatted correctly. 137 The '%s' parameter for the test '%s' is not formatted correctly. 138 The '%s' parameter for the test '%s' is not formatted correctly. 139 The '%s' parameter for the test '%s' is not formatted correctly. 140 Winstone 32 cannot play multiple full screen video clips at the same time. 141 The video clip index value of the '%s' parameter for the test '%s' must be between %ld and %ld inclusive. 142 Winstone 32 has found insufficient free disk space to copy the video clip files to the directory %s.\n\nYou need approximately %ld additional bytes to run the test. 143 The video test failed to terminate within the alotted time. 144 The '%s' parameter for the test '%s' does not contain a value. 145 The value of the '%s' parameter for the test '%s' must be between %ld and %ld inclusive. 146 The values of the '%s' parameter for the test '%s' must be greater than zero. 147 The video test failed because %s 148 Each value of the '%s' parameter for the test '%s' must be between %ld and %ld inclusive. 149 The clipping window size values of the '%s' parameter for the test '%s' must be between %ld and %ld inclusive. 150 The clipping window origin values of the '%s' parameter for the test '%s' must be between %ld and %ld inclusive. 151 The results for '%s' and '%s' use the same database field.\n\nPlease contact the Ziff-Davis Benchmark Operation and report this problem. 152 Winstone 32 can't import results from the file because it is corrupt or it was produced by another benchmark or an old version of Winstone 32. 153 You prematurely terminated the test by pressing the Escape key.\n\nYou may run the tests again by choosing the Run button in the Functions window. 154 The '%s' parameter for the test '%s' is not a valid boolean value. 155 Winstone 32 can't load the RDMSRxxx.DLL library, or the library is invalid. 156 Winstone 32 could not get the address of the procedure '%s' in the DLL %s. 157 Winstone 32 cannot load the library %s. The error code was %ld. 158 Winstone 32 cannot run any video tests unless Video for Windows is installed. 159 Computing the utilization caused the number of dropped frames to increase from %ld to %ld. 160 A DOS file operation failed during the CD-ROM test. Clean the CD-ROM with water and a non-abrasive cloth and try the test again.\n\nThe following information is for ZDBOp use:\n\n %s 161 The test program failed to comunicate results back to Winstone 32.\n\n The test program was started using the command line:\n\n %s 162 Winstone 32 could not start a 32-bit program using the command line:\n\n%s\n\nYou must install Win32s before running any 32-bit programs. 163 Winstone 32 could not start a 32-bit program using the command line:\n\n%s\n\nIf you are using OS/2 Warp, you must install Win32s 1.15, or earlier, before running any 32-bit programs. 164 The test program returned an error code indicating that it failed.\n\nThe test program was started using the command line:\n\n %s\n\nThe program returned an error code of %ld. 165 Winstone 32 could not create the directory '%s'. 166 The directory %s already exists and cannot be used as a database directory. 167 The desired transfer rate of %ld KB/S is higher than the measured maximum transfer rate of the CD-ROM drive, %ld KB/S. 168 The CD-ROM is not large enough to proceed with the current test parameters. Try changing the number of points sampled or the block size of the samples. 169 The CD-ROM CPU Utilization test could not compute the CPU usage.\n\nClean the CD-ROM with water and a non-abrasive cloth and try the test again.\n\nIf the problem persists contact the Ziff-Davis Benchmark Operation. 170 The CD-ROM CPU Access Time test cannot be run under Windows NT due to the lack of full MSCDEX support in the 16-bit Windows subsystem. 171 The test failed due to a sharing violation. If you have SHARE.EXE loaded, make sure to use the command line\n\n SHARE /F:5100 /L:500\n\nor use the VSHARE.386 VxD instead.\n\nThe following information is for ZDBOp use:\n\n %s 172 The test failed due to an access denied error. Make sure you have the necessary file system permissions to access or modify the test drive.\n\nThe following information is for ZDBOp use:\n\n %s 173 Winstone 32 could not allocate enough memory to load the file %s. 174 The bitmap file '%s' is either corrupt or an unsupported bitmap format. 175 The bitmap file '%s' does not exist or is not accessible. 176 The CD-ROM/CPU Utilization Read Size parameter must be a multiple of 2 in the range of 2 to 32. You specified a read size of %s. 177 The CD-ROM/CPU Utilization Transfer Rate parameter must be an integer in the range of 1 to the maximum transfer rate of the drive. You specified a read size of %s. 178 The drive %s is not a valid CD-ROM drive or is not accessible. 179 The video clip file %s does not exist or is not accessible. 180 Winstone 32 can't create files on drive %s.\n\nMake sure you have the necessary file system permissions to modify the test drive.\n\nThe following information is for ZDBOp use:\n\n %s 181 The bitmap file '%s' is an unsupported bitmap format. 182 The test '%s' cannot be run in batch mode.\n\nRun Winstone 32 in interactive mode, select the test and run it. 183 Winstone 32 cannot access %s because it is being used by another program. Close all other applications and try running the test again. 239 Winstone 32 has detected an old version of %s. Install the latest version of this file and try running Winstone 32 again. 240 Winstone 32 failed to start. Correct any problems Winstone 32 reported before running the benchmark again. Choose OK to exit. 241 This release of Winstone 32 does not support OS/2. 242 This release of Winstone 32 requires Windows NT Workstation operating system version 3.51 or later. 243 This release of Winstone 32 does not support Windows 3.1x or Windows for Workgroups 3.1x. 244 Winstone 32 could not complete the current test run because it encountered a problem with the following application:\n\n%s\n\nRestart Windows and try running the test again. 245 Winstone 32 could not find the directory '%s'. Check to see if it exists or is inaccessible. 246 '%s' is either a long file name or has illegal characters. This version of Winstone 32 accepts only 8.3 file names. 247 There is no value for the base directory. Winstone 32 cannot perform its tests unless you supply a valid base directory in the Settings dialog box. 248 Winstone 32 could not find the base directory '%s'. Winstone 32 cannot perform its tests unless you supply a valid base directory in the Settings dialog box. 249 The Winstone 32 base directory name '%s' is too long. The path name must be less than %ld characters. 250 The base directory does not contain the Winstone 32 test directories. Winstone 32 cannot perform its tests unless you supply a valid base directory in the Settings dialog box. 251 There is no value for the work directory. Winstone 32 cannot perform its tests unless you supply a valid work directory in the Settings dialog box. 252 Winstone 32 could not find the work directory '%s'. Would you like Winstone 32 to create it now? 253 The Winstone 32 work directory name '%s' is too long. The path name must be less than %ld characters. 254 Winstone 32 could not find the work directory '%s'. Winstone 32 cannot perform its tests unless you supply a valid work directory in the Settings dialog box. 255 Winstone 32 could not create the directory '%s'. Check to see if it is inaccessible. 256 You must have administrator privileges to run Winstone 32 on Windows NT. 257 While backing up the PC's Registry, Windows reported the following error: %s. 258 Winstone 32 could not back up the PC's Registry. Restart Windows, and if you continue to receive this message, please contact the Ziff-Davis Benchmark Operation. 259 While restoring the PC's Registry, Windows reported the following error: %s. 260 Winstone 32 could not restore the Registry. Restart Windows, and if you continue to receive this message, please contact the Ziff-Davis Benchmark Operation. 261 Winstone 32 could not backup the PC's WIN.INI settings. Restart Windows, and if you continue to receive this message, please contact the Ziff-Davis Benchmark Operation. 262 Winstone 32 could not restore PC's WIN.INI settings. Restart Windows, and if you continue to receive this message, please contact the Ziff-Davis Benchmark Operation. 263 While restoring the PC's file system, Winstone 32 was unable to find the file %s. Winstone 32 needs this file to restore the system. Please contact the Ziff-Davis Benchmark Operation. 264 While restoring the PC's file system, Winstone 32 was unable to delete its copy of %s. The file may be in use by another application. Try restarting Windows so the Clean Up program can restore the system. 265 While restoring the PC's file system, Winstone 32 was unable to delete its copy of %s and replace it with the backup file %s. The file may be in use by another application. Try restarting Windows so the Clean Up program can restore the system. 266 While restoring the PC's file system, Winstone 32 was unable to rename the backup file %s to its original name %s. The file may be in use by another application. Try restarting Windows so the Clean Up program can restore the system. 267 Winstone 32 could not restore the PC's file system. Restart Windows, and if you continue to receive this message, please contact the Ziff-Davis Benchmark Operation. 268 While adding the Winstone 32 printer driver and printer, Windows reported the following error: %s 269 Winstone 32 could not add the Winstone 32 printer driver and printer to the PC. Restart Windows, and if you continue to receive this message, please contact the Ziff-Davis Benchmark Operation. 270 While deleting the Winstone 32 printer and printer driver, Windows reported the following error: %s 271 Winstone 32 could not delete the Winstone 32 printer and printer driver from the PC. Restart Windows, and if you continue to receive this message, please contact the Ziff-Davis Benchmark Operation. 272 Winstone 32 could not copy %s to %s. Check to see if the source does not exist or if the destination directory is inaccessable. 273 Winstone 32 encountered an unrecognized path variable.\nline: %ld\ntext: %s 274 Winstone 32 could not install the font file %s. The file may be in use by another application. Close all other applications and try running the test again. 275 Winstone 32 requires Service Pack 1 or later for Windows NT Workstation operating system version 3.51. 280 Error on line %ld.\n'%s' 281 Syntax error in configuration file on line %ld.\n'%s' 282 Unexpected end of configuration file in conditional started on line %ld. 283 Unexpected '%s' in configuration file on line %ld. 286 Unknown symbol '%s' in configuration file on line %ld. 287 Configuration file line %ld terminated incorrectly. 288 Bad focus in configuration file on line %ld. Valid values are Disclosure, Environment, or a string specifying an .ini file. 289 Unrecognized type, '%s', in configuration file on line %ld. 290 Missing ' %s ' in configuration file on line %ld. 291 Too many variables specified in configuration file on line %ld. Only %ld variables are allowed at a time. 293 '%s' is not a valid disclosure field in configuration file on line %ld. 294 No topic has been specified for entry in configuration file on line %ld. 295 Winstone 32 is unable to read the registration database entry in configuration file on line %ld. 296 Type mismatch for variable ' %s ' in configuration file on line %ld. 297 Trying to write to read-only variable ' %s ' in configuration file on line %ld. 298 Mixing string and number types in expression on line %ld. 512 Informational Messages 513 Failed 514 Winstone 32 is determining the test parameters. 515 Winstone 32 is executing the test. 516 Million Pixels/Sec 517 DOS applications were running during this test and could affect the test results. 518 The following Windows tasks were running during this test and could affect the test results: %.200s 519 Winstone 32 has detected active communication programs. Winstone 32 tests may interfere with the communication programs. Do you want to run the test(s) anyway? 520 You moved the mouse during the test, possibly affecting the results. 521 Winstone 32 is copying the screen image to the clipboard. 522 Winstone 32 is examining the execution environment. 523 Do you want to terminate the running tests? 524 There are no tests to run. 525 Winstone 32 is initializing. 526 There are no test results to display. 527 Operations/Second 528 Winstone 32 is computing the test overhead. 529 Text File (*.TXT)|*.txt|Lotus 1-2-3 File (*.CSV)|*.csv|MS Excel File (*.XLS)|*.xls| 530 All (*.TXT,*.XLS,*.CSV)|*.txt;*.xls;*.csv| 531 Import Results from File 532 %s MHz 533 Windows %d.%d %s 534 MS-DOS %d.%d 535 Real Mode@Standard Mode@Enhanced Mode@Enhanced Mode with Paging@ 536 %s, Version: %d.%02d, Date: %s, Size: %ld 537 %d X %d %d bits/pixel 538 Test Screen 539 Winstone 32 has detected an old version of CTL3DV2.DLL that may not work with Winstone 32.\n\nFind the newest version of CTL3DV2.DLL on the hard disk, copy it to the Windows system directory, delete all other copies, and then reinstall Winstone 32. 540 Winstone 32 has detected an old version of BWCC.DLL that may not work with Winstone 32.\n\nFind the newest version of BWCC.DLL on the hard disk, copy it to the Windows system directory, delete all other copies, and then reinstall Winstone 32. 541 Winstone 32 has detected an old version of DOS. ZDBOp has only tested Winstone 32 using version 5.0 of MS-DOS. Winstone 32 may not work correctly with older versions. 542 Test results may not be meaningful because the computer's display uses pixels that are not square. 543 @SN@T@A@ 544 Winstone 32 is checking its files for corruption. 545 Metafile (*.WMF)|*.wmf| 546 Winstone 32 is reading the suite description. 547 Non-default Test settings: 548 Thousand Bytes/Sec 549 Not Run 550 Fraction of %s 551 552 Selected... 553 REQUIRED DISCLOSURE 554 ADDITIONAL INFORMATION 555 WEIGHTED SUITE 556 TEST 557 UNITS 558 SCORE 559 NOTES 560 CONTENTS OF 561 Winstone 32 is initializing the disk test. 563 NAME 564 END 565 Windows NT 566 80x86 Emulation 567 There may not be enough free system resources for Winstone 32 to execute properly. You should terminate other applications before running Winstone 32. 568 Do you want to discard the changes you've made to the Disclosure Questionnaire? 569 Unknown 570 Do you want to delete all current test results? 571 Suite File (*.WSS)|*.wss| 572 Save Suite in File 573 Load Suite from File 574 There are no selected tests that have settings you may change. 575 Do you want to remove the suite named %s from the suite list?\n\nNote that Winstone 32 will not delete the file containing the suite definition (if any). 576 Edit Custom Suite 577 Do you want to save the current results before exiting? 578 SUITES 579 EXPORTS 580 You must supply a Description using the Disclosure Questionnaire before you can save, export, or print the current results.\n\nWinstone 32 will display the Questionnaire when you choose OK. 581 SmartDrive %.2f 583 You selected a non-default option: 584 Can't Normalize 585 Export Results to File 587 Preparing: %s 589 Winstone 32 has detected an old version of OS/2. ZDBOp only tested Winstone 32 using OS/2 Warp. Winstone 32 may not work correctly with the older version. 590 Winstone 32 has detected an old version of Novell DOS. ZDBOp only tested Winstone 32 using version 7 of Novell DOS. Winstone 32 may not work correctly with older versions. 591 Step %ld (1: One Step, 2: Ten Steps, 3: 100 Steps, 4: 1000 Steps, End: Run) 592 You used an option that prevents Winstone 32 from producing valid results. 593 %d Hz 594 Hardware 595 Software 596 Windows for Workgroups %d.%d %s 597 VFAT Cache 598 (Interlaced) 599 (not verified) 600 @@ 601 Deleting files left over from a previously aborted disk test. 602 Deleting the disk test files. 603 Creating initial directories and files. 604 Replaying and timing %s. 605 Preparing files for %s. 606 Closing files used by the disk test. 607 Tests with Common Settings 608 Flushing the system cache. 609 Winstone 32 has detected that the hardware or software configuration may have changed since the last time you editted the Disclosure Questionnaire.\n\nYou should re-check the Disclosure Questionnaire for accuracy. 610 (Vertical Scans) 611 Dithered,%s Pattern(Size:%dx%d,Colors:%d), Levels(Red:%d,Green:%d,Blue:%d),%s ZDBOp Use: %.3g 612 True Color,%s Levels(Red:%d,Green:%d,Blue:%d), ZDBOp Use: %.3g 613 Uses VGA.DRV pattern, 614 Uses custom pattern, 615 Gray Scale, 616 Tests: 617 Note: 618 Marks: 619 N/R 620 N/E 622 Do you want to create the database directory %s? 624 Winstone 32 found results in the source database with the same key and time-stamp as results in the target database. Winstone 32 did not merge these records into the target database. 625 The current test results and disclosure have not changed since the last time you saved them to a database.\n\nAre you sure you want to save the current results in a database? 626 There are no current test results.\n\nAre you sure you want to save, export, or print the current results? 628 %s is not a database directory. 631 The path %s does not exist. 634 Please choose a Database. 635 Text File (*.TXT)|*.txt| 636 Export Disclosure to a File 637 Export Table of Results to a File 638 Windows %d %s 639 Bitmap Files (*.BMP)|*.bmp| 640 Export Test Screen to a Bitmap File 642 Winstone 32 is saving the final surface image. 643 OK 644 Percent Frames Displayed 645 Copying to play directory 646 %d test(s) selected 647 %s (%d of %d) 648 %s (Step %d of %d; Test %d of %d) 649 Random Accesses per Second 650 The last time Winstone 32 ran, the test '%s' failed without restoring the system to its pretest state.\n\nDo you want Winstone 32 to restore the system now? 651 Frames Dropped 652 Milliseconds 653 Frames/Sec 654 Percent Used 655 Audio Breaks 656 Percent Nominal Speed 657 Better 658 Worse 659 Passes/Sec 660 All Files (*.*)|*.*| 662 Export File Version 663 Error 664 Computing idle work available (%ld seconds) 665 Preparing video test 666 Playing video clip (%d seconds) 667 Playing video clips (%d seconds) 668 Playing video clip w/o sound (%d seconds) - Maximum Frame Rate 669 Playing video clips w/o sound (%d seconds) - Maximum Rrame Rate 670 Playing video clip (%d seconds) - CPU Utilization 671 Playing video clips (%d seconds) - CPU Utilization 672 Deleting files from play directory 674 Continue With Save 675 Continue With Export 676 Continue With Print 677 Are you sure you want to delete the record from the database %s? 678 Are you sure you want to delete %d records from the database %s? 679 Select a Database 680 All Databases (*.*)|*.*|| 681 Cannot read drive %s.\n\nPlease verify the drive door is closed and that the disk is formatted and free of errors. 682 Select Source Database 683 Select Target Database 684 No database is selected. 685 All results have been filtered out. Try changing or clearing the filter. 686 The database does not contain any results for Winstone 32. Try using another database. 687 Select the database records and choose OK to add them as comparison machines. 688 Select the database records and choose OK to permanently delete them from the database. 689 An error occured and no records were read from the database. 690 Winstone 32 is initializing the CD-ROM test. 691 Winstone 32 is initializing the CD-ROM test. 692 Winstone 32 is gathering CD-ROM statistics. 693 Winstone 32 is calculating CD-ROM utilization. 694 Winstone 32 is checking the CD-ROM for the correct file system. 696 You must insert the %s in drive %s before running this test. 697 698 You can only have %d comparison machines. 699 The currently selected database %s no longer exists. Please select another database. 700 Winstone 32 has detected that you have changed the size or color depth of the display surface. Winstone 32 does not support on-the-fly changes to the display surface. You should restart Winstone 32 as soon as possible. 701 The video clip(s) played contain a total of %ld frames 702 the MCI command %s with the parameter %s failed.\n\nThe driver for the file %s may not support this command. Try playing the video clip with Media Player. Contact the driver vendor for the latest driver.\n\nThe MCI error was %lXh: %s 703 Video for Windows (*.AVI)|*.avi| 704 Select a Video Clip 705 Select a Bitmap 706 Select a Video Playback Directory 707 Legend: 708 Best Score, 709 Intermediate Score, 710 Worst Score 711 Run Tests 712 System Cache 713 All available RAM 714 N/A 715 Reading registry data. 716 Hours 717 hh:mm:ss 718 Work 719 Work Integral 720 721 Yes 722 No 723 Do you want Winstone 32 to continue the '%s' test? 768 !Benchmark@!&*Operating System@!&*Windows System@!&*Processor@!&*CoProcessor@!*Processor Speed@!*Off-Chip Processor Cache@!&*Processor RAM@ 769 !&Display Driver@!*Display Adapter@!*Display DRAM@!*Display VRAM@!*Display Refresh Rate@!Display Mode@ 770 !*Hard Disk@!*Hard Disk Controller@!*HD Controller RAM@!*OS Software Cache@!*OS Software Cache Size@!*Windows Software Cache@!*Windows Software Cache Size@ 771 *Description@*Computer@*Machine Name@Serial Number@Registered Name@Registered Organization@*Tester Name@*Tester Organization@Time@*Comments@ 772 32-bit File Access@32-bit Disk Access@&Swap File Type@&Swap File Size@ 773 *Display Color Reproduction@*Display Cursor Type@System Metrics@&Display Device Capabilities@&Display Adapter Types@&Display VESA Information@*Display BIOS Information@ 774 &FILES@&BUFFERS@&BREAK@&MSCDEX Information@&SHARE Information@Drive Information@&Disk Settings@ 775 *BIOS Manufacturer@&BIOS Information@&*Bus Type@*Power Management@&Conventional Memory@&XMS Memory@&EMS Memory@&VCPI Information@&DPMI Information@ 776 &DOS Location@&DOS Information@&Mouse Information@*PC Emulation Information@Environment Variables@&DOS TSR List@&DOS Device Driver List@ 777 *PIN@*Variant1@*Variant2@*Variant3@*Variant4@*Variant5@*Project@ 778 !*CDROM Drive@!*CDROM Controller@!*CDROM Controller RAM@!*CDROM Software Cache@!*CDROM Software Cache Size@!*Sound Adapter@!&Video For Windows Version@&Windows Drivers@&Win32s Version@ 779 Unknown@Unknown@Unknown@Unknown@Unknown@? MHz@? KB@? MB@ 780 Unknown@Unknown@? KB@? KB@? Hz@Unknown@ 781 Unknown@Unknown@? KB@Unknown@? KB, Windows: ? KB@Unknown@? KB@ 782 Current Results@Unknown@Unknown@@Unknown@Unknown@@@Unknown@@ 783 ?@?@Unknown@? KB@ 784 Unknown@Unknown@Unknown@Unknown@Unknown@Unknown@Unknown@ 785 Unknown@Unknown@?@Unknown@?@Unknown@Unknown@ 786 Unknown@Unknown@Unknown@Unknown@Unknown@Unknown@Unknown@Unknown@Unknown@ 787 Unknown@Unknown@Unknown@Unknown@Unknown@Unknown@Unknown@ 788 @@@@@@@ 789 Unknown@Unknown@? KB@Unknown@? KB@Unknown@@@@ 790 BMARK@OS_REV@WIN_OS_REV@CPU_TYPE@MATH_COPR@CPU_SPEED@OFF_C_CACH@CPU_RAM@ 791 VID_DRVR@VIDEO_ADAP@VID_DRAM@VID_VRAM@REF_RATE@VID_MODE@ 792 HARD_DISK@HD_CNTRL@HD_CNT_RAM@OS_CACHE@OS_CA_RAM@WIN_CACHE@W_CACH_RAM@ 793 DESCRIPT@COMPUTER@MACH_NAME@SERIAL_NUM@REG_NAME@REG_ORG@TESTER@TESTER_ORG@TIME_STMP@COMMENTS@ 794 FI_ACC_32@HD_ACC_32@WIN_SWP_TY@WIN_SWP_SZ@ 795 COLOR_REP@CUR_TYPE@SYS_METRIX@VID_CAPAB@VID_AD_TYP@VESA_INFO@VBIOS_INFO@ 796 FILES_EQ@BUFFERS_EQ@BREAK_EQ@MSCDEX_VER@SHARE@DRIVE_INFO@DSK_SETNGS@ 797 BIOS_MFGR@BIOS_INFO@BUS_TYPE@APM_INFO@CONV_MEM@XMS_MEM@EMS_MEM@VCPI_VER@DPMI_VER@ 798 DOS_LOC@DOS_INFO@MOUSE_INFO@SOFTPC_EMU@ENVIRON@TSR_LIST@DEV_DRVRS@ 799 PIN@VARIANT1@VARIANT2@VARIANT3@VARIANT4@VARIANT5@PROJ_ID@ 800 @@@@@@@@@ 801 Screen: %dX%d, Full Screen: %dX%d\nFrame: %dX%d, Border: %dX%d, DlgFrame: %dX%d\nScroll V: %dX%d H: %dX%d\nThumb V: %d H: %d\nCaption: %d, Menu: %d, Size: %dX%d\n 802 Icon: %dX%d, Cursor: %dX%d\nMinTrack: %dX%d, Min: %dX%d\nMouse: %d, Swap: %d, Debug: %d, Kanji: %d 803 Size: %dX%d pixels, %dX%d mm., %dX%d pixels/inch\nAspect: %dX%d %d\nPlanes: %d, Bits/Plane: %d\nPalette Size: %d, Reserved: %d\nColor Resolution: %d\n 804 Brushes: %d, Pens:%d, Fonts: %d, Colors: %d\nCapabilities:\n Clip 0x%x, Raster 0x%x, Curve 0x%x\n Line 0x%x, Poly 0x%x, Text 0x%x 805 Configuraion Files (*.CFG)|*.cfg| 806 Load Custom Configuration File 807 Winstone 32 could not display its license agreement. Choose OK to try again. If Winstone 32 doesn't display the agreement, please report this problem to ZDBOp. 808 You have not saved the current results. If you run another test, the current results will be lost. Do you want to start another test and lose the unsaved results? 912 Winstone 32 units 913 Overall Winstone 32 914 Business Graphics/DTP 915 Database 917 Word Processing/Spreadsheet 918 Winstone 32 is backing up the PC's system files. 919 Winstone 32 is installing %s in the working directory. Choose Cancel to abort the test. 920 Winstone 32 is removing %s from the working directory. 921 Winstone 32 is updating the PC's system files for the test. Choose Cancel to abort the test. 922 Winstone 32 is restoring the PC's system files. 923 Winstone 32 is updating the PC's configuration for the test. Choose Cancel to abort the test. 924 Winstone 32 is restoring the PC's configuration. 925 Winstone 32 is restoring the PC's file system. 926 Winstone 32 has successfully returned the PC to its pretest condition. 927 Winstone 32 is running %s. 928 ZDBOp has tested Winstone 32 with English, French, and German language versions of Windows 95 and Windows NT 3.51. Winstone 32 may be compatible with other language versions. See the README.TXT file for more information. 1024 Product Identifications: Do not edit in Resource Workshop 1025 Winstone 32 Version 1.0 1026 Ziff-Davis' Winstone 32 Version 1.0 1027 Ziff-Davis' Winstone 32 Version 1.0 1028 WinstoneŽ 32 Version 1.0 1029 Winstone 32